|
Terminology.
We use the term “objects” to describe anything that is being framed that is not a picture or other flat work. For instance, a wedding dress, footy jersey, fossil or mask, is what we would loosely call an object. A certificate, etching or photo, is not.
Object framing.
When framing objects, there are several differences to consider from framing a flat work such as a painting or drawing. They are Primarily the depth of the frame, the way in which the frame shall be spaced to allow clearance and the way that the object will be affixed onto the backing.
- Frame Depth & boxing.
The depth of a frame has to be sufficient to allow the object to fit within it. In other words, the frame has to poke out from the wall a larger amount, so that it creates a space truly in 3 dimensions. The Problem with this set up, is that the frames that come with sufficient depth to accommodate something like a cricket bat, are few and far between. This means it is usually necessary to ad something to the back of the frame to give the required volume. This can be done in several different ways, though is usually achieved by using a similar coloured moulding that does have the depth & screwing or hinging it to the back of the main frame. Some framers prefer to use something like a black spacer that sits in the back of the frame, Though depending on the colour of the other frame, this can be a mistake.
- Frame Spacing.
When frames are made with glass in them to hold an object, there needs to be some way to hold the glazing firmly in the front of the frame. This can be done in several ways, though the main thing is to make sure that A; the spacer fits within the frame, & B; that the spacer is just deeper than the object being framed.
- Attachment.
Attaching objects to backings is a different task for each individual object being framed. There are considerations to be made with things like a sword as to whether you will be likely to remove them from their frame on a regular basis. In this case you would probably use perspex or metal clips, to hold it in place so that constant use would not damage the sword or the frame. This method is generally more expensive, as it requires more time to make.
If you were framing something like a signed golfing glove, you would probably want to get it sewn onto the backing. This is not something that you will want to get done & re-done as it costs money & time. This is however a completely reversible process & should leave no lasting impact on your piece after you have it framed.
If you were to get a cheap Chinese embroidery framed, you could have it stapled to the backing. This is a semi removable process that is quick, cheap & accurate, though is not advisable to use on expensive or precious works.
The fourth method is to glue the object down. This has limited use as the object must be strong enough to support itself, must not be see through and must be dispensable. It can be a very strong method though, when used correctly.
|
|
